WATER COOLED CHILLER 30XW
Description
Carrier WATER COOLED CHILLER 30XW AQUAFORCE®
High Efficiency, Water-Cooled
Indoor Liquid Screw Chiller
with R-134a Refrigerant
150 to 400 nominal Tons
The 30XW units are high-efficiency, indoor water-cooled chillers with a quiet, low-vibration design featuring screw compressors. The units have excellent part load efficiency and a compact footprint less than 48 in. wide, making them great replacement units.
See more Carrier Water Cooled Chiller Solutions. Carrier WATER COOLED CHILLER 30XW.
Features
PerformanceReliabilityMaintenanceInstallationStandard WarrantyFactory-Installed OptionsField-Installed Accessories
- AHRI certified efficiencies to 0.468 kW per ton IPLV.
- Chlorine-free R-134a HFC refrigerant.
- Low energy consumption during part load and full load operation.
- Available operational voltages include: 200-v, 230-v, 380-v, 460-v, 575-v (60 Hz).
- Wye-delta starter is standard on 200-v and 230-v units (factory-installed option for all other units).
- Leaving-fluid temperature directly controlled to within 0.5° F (0.3° C).
- Entering-fluid temperature continuously monitored to detect flow or load changes.
- Compatible with Carrier Comfort Network® (CCN) communication link.
- Standard water-side operating pressure of 150 psig (1034 kPa) with an available option of 300 psig (2068 kPa) (factory-installed option).
- ASHRAE 90.1 compliant.
- Certified in accordance with AHRI Standard 550/590.
- Dual independent refrigeration circuits (sizes 325-400).
- Low voltage control circuits.
- Short cycle protection.
- Dual chiller control.
- Temperature reset from return fluid.
- Chilled water flow switch.
- Electronic refrigerant gages.
- Listed with UL and UL, Canada.
- Hermetic twin screw compressors.
- Mechanically cleanable condenser and evaporator.
- Alarm contacts.
- Filter drier.
- Moisture indicating sight glass.
- Accessible service information including suction and discharge pressure and temperature using Navigator™ display module (factory-installed option or field-installed accessory).
- Discharge and liquid line shutoff valves (factory-installed option).
- ON/OFF control switch.
- Unit width of 48 in. or less.
- Single point electrical connection (with optional control power transformer).
- Neoprene vibration isolation pads (field-installed accessory).
- One year parts only
- .
- Wye-delta start.
- Dual point power connection (325-400 ton).
- Non-fused disconnect.
- Control power transformer.
- 115-v GFCI (ground fault circuit interrupter) convenience outlet.
- Marine water boxes.
- Flange connections.
- Suction service valves.
- Isolation valves.
- One pass evaporator water box.
- Three pass evaporator water box.
- 300 psi (2068 kPA) water side operating pressure rating.
- One-pass condenser water box.
- Minimum load control.
- Navigator display module.
- LON (Local Operating Network) translator control.
- BACnet* translator control.
- EMM (Energy Management Module).
- Temperature reset sensor.
- EMM.
- LON translator control.
- BACnet translator control.
- Sound Attenuation Packages.
- Navigator display module.
- Vibration isolation pads.
- Vibration isolation springs.
Documents
Product Data
